Stain Removal Tips

Full Service Carpet Cleaning Company


Stain Removal Tips

First, remove the spot as quickly as possible. But here’s the real key that can save you thousands of dollars in carpet replacement and headaches……

Use a wet vac to extract all liquid or moisture in the spill or spot BEFORE you use a spot remover.

A small carpet spotting machine will work too, but remember to use a vacuum that can handle extracting liquids Once the bulk of the spill or spot is removed, use a neutral detergent spotter (like our SpotOut Cleaner) and gently wipe the spot up. If residue from the detergent remains, pour a cup of water on the area and extract the water with your wet vac. It's really that easy.

This procedure will work on any spill no matter how big or small. Remember to always pre-test the fiber before using any spot remover or water. Some specialty rugs can be ruined by water.

3 Tips for Better Spot Removal

  1. Remove it NOW. The longer you wait, the harder it will be to remove. If you cannot remove the stain, call Bayside right away.
  2. DO NOT USE Resolve or other high residue products on your area rugs. Use a neutral ph spotting agent that is made for wool. Call us for purchase information.
  3. Use as little moisture as possible with silk, sisal, cotton, and grass rugs. For these, apply a spotter to a cloth and gently dab the stain.

CAUTION! Some area rugs have a very unstable dye and can be easily ruined. Always pre-test any solution on the rug before attempting spot removal.

Below are some special tips that will help:

  • Make sure you NEVER apply any solvent (nail polish or rubbing alchohol) directly to the carpet. This could cause weakening of the fiber backing.
  • Use a spot machine (by bissel, little green machine, etc) or a wet vacuum to extract any liquid spot BEFORE you treat it with any spot removing solution.
  • DON'T USE TOO MUCH SOLUTION. An entire bottle of spotter should NEVER be used on one spot.
  • RINSE, RINSE, RINSE. This is one of the biggest things homeowners overlook. Remember, the rinse water can be extracted with your spot machine or wet vacuum.

Most spots: Use our SpotOut Cleaner or mix 1/4 teaspoon clear hand dishwashing soap with 1 cup water and follow the directions above. Avoid high residue spotters such as Resolve.

Grease or Oils: For greasy spots, apply rubbing alcohol to a cloth and gently dab the spot. Never pour a solvent directly on your carpet.

Wax: Melt the wax unto a paper bag with a steam iron at a low temperature. Place the paper bag over the wax. Do not allow the iron to directly touch the carpet.

Urine:Although old urine stains cannot be removed from the carpet unless they are cut out, stains that have appeared within a couple of hours can often be cleaned with good success. This can be accomplished by using a 50/50 solution of white vinegar and water, followed by blotting with water only. After this, absorb the spot with clean colorfast towels until it is as dry as possible. Next, place a one-half inch thick weighted layer of colorfast towel over the spot and let it sit overnight. This final procedure must not be overlooked since crystallized urine residues left in the carpet are capable of reproducing odors during the warmer more humid months. Older urine stains often require replacement of the part and pad in the affected areas and can also necessitate cleaning the subfloor with a disinfectant.

Vomit The first step is to scrape up as much of the disgorged matter as possible.Next, it is important to elevate the pH of the stained area. This should be accomplished by blotting using a solution of one part non-sudsing ammonia to five parts water, followed with blotting with a damp towel until the spot is as dry as possible. Again, it is also recommended that you place a weighted layer of colorfast towels folded one-half inch thick over the spot and allow it to sit overnight to allow residual matter to wick up into the towel.

If you can't remove the spot, call us at 609-290-2691 or email info@baysidecarpetcleaning.org . We'll fit you in our schedule.

Three steps for proper carpet care

Carpet cleaning is just like exercise! If you get into a routine and keep it up, you will see great results and feel better for it. And understanding the right way to clean carpet will help you save time by doing it correctly the first time with products that do the job right from the start. Not only will Seal of Approval cleaning products help keep your carpet looking great, they can also help meet the warranty requirements of the carpet manufacturer. Below are three simple steps to keeping your carpet clean and looking great:

  1. Vacuum at the right frequency with a CRI-approved vacuum.
  2. Clean spots and spills quickly with products that do not damage the carpet or cause it to resoil more quickly.
  3. Professionally deep clean your carpets every 12 to 18 months to remove embedded dirt and grime.

Stop dirt at the door

Preventing dirt and grime from getting on the carpet in the first place is a great way to start keeping it clean. The following helpful hints can stop dirt in its tracks.

  • Use mats — Outdoor and indoor mats or runners can reduce the amount of dirt that enters the house.
  • Take off your shoes — You can save wear and tear on carpet by asking everyone to take their shoes off before entering your home.
  • Change your air filters — Change air filters in your heating and air-conditioning systems as recommended by the manufacturer’s directions. The more dust and particles removed by the filter, the fewer that fall onto the carpet.

We know it's helpful to have someone to talk to directly. If you have questions, or prefer to schedule your estimate via the phone,
Please call: 609-290-2691